GECIL MINIDIST PLUS TYPE A VERSION V7 - ASTM D5236 (POTSTILL)

ASTM D5236 - Pot Still

 

Brand: GECIL
Product: MINIDIST PLUS TYPE A VERSION V7 - ASTM D5236 (POTSTILL)

Description:

ASTM D5236 Pot Still Distillation from 2L up to 30L

D5236 Potstill distillation for Crude Residue , Petroleum Products , Chemicals, Bio fuels , Bio Oils , Etc..

FULLY AUTOMATIC ASTM D5236 UNIT TYPE A

- No operator intervention during the distillation up to FBP 600 C AET
- Up to 300 Pot still analysis per year
- Easy operation in local mode and more versatile use in remote supervisor mode

Fully automatic distillation unit in accordance with ASTM 5236 method for the distillation of crude residues or heavy cuts with automatic procedure from loading the sample to reduced pressure without any intervention from the operator during each step of the distillation except to remove the prepared fractions at the end of each sequence ( if more than 12 fractions need to be prepared ) I.e. about 5 minutes every 3 to 4 hours operation.

Unit includes a D5236 column with antifoaming packing and a stainless steel boiling flask, with capacity 2 to 30 L . Special column and flask size on request.

- This unit can carry out all types of discontinuous distillation of chemical and organic components for boiling temperatures up to 350°C/650°F under atmospheric pressure and also at vacuum down to 0.1 mmHg which corresponds to an atmospheric equivalent temperature (AET) of 600-650°C/1100-1200°F.
- The complete Pot Still D5236 distillation can be performed from loading the sample to the Final boiling point within about 3 to 5 hours. All the different steps are chained automatically. When the next step involves a pressure change, the sample charge flask is automatically cooled to a preset temperature and return to atmospheric pressure, then operator removes full distillate receivers up to 12, replaces these with empty ones and approves the continuation of the next step toward FBP .The fractions can be prepared by temperature and / or % volume set points .

The MINIDIST PLUS type A process cabinet is a closed cabinet with safety doors for easy access. In Version V6.0 of MINIDIST PLUS type A, a built in industrial PC with interface process boards has been implemented in the local process cabinet with a color LCD display and industrial alphanumeric keyboard . No more dedicated interfaces in the supervisor Windows NT PC generally located away from the process cabinet.


MAIN BENEFITS

- Fully automatic from loading the sample to FBP 600/650 C AET under vacuum.
- Local mode and supervisor mode control.
- Automatic fraction collectors up to 12 receivers per sequence. Maximum 72 fractions.
- High level of safeties allowing to run day and night with high throughput of analysis per year (up to 300 or more Pot Still analysis per year).
- Distillation of any kind of petroleum or petrochemical products or fractions such as crude residues, lubricating oils, LVGO, HVGO, asphalt , etc.. But also Bio Fuels and Bio Oils Etc



GECDIST Net supervisor SOFTWARE

GECDIST Net supervisor software allows to monitor several distillations from GECIL Process MINIDIST PLUS product line such as MVD D2892 , type E D2892 , type A D5236, D1160 Stand alone MINIDIST 1160 or Multiprocess units type C or D .
Up to 16 distillation units can be link to one PC supervisor GECDIST Net .
Our technical staff will configure the software at installation of a distillation unit.
More

Gallery: