MINIDIST PLUS type E and F version V6 - ASTM D2892 (TBP)
GECIL MINIDIST PLUS TYPE E AND F VERSION V6 - ASTM D2892 (TBP)
ASTM D2892 - TBP - True Boiling Point
Brand: GECIL Product: MINIDIST PLUS TYPE E AND F VERSION V6 - ASTM D2892 (TBP)
ASTM D2892 Distillation from 2L up to 100L
D2892 TBP Distillation for Crude Oil , Petroleum Products , Chemicals , Bio fuels , Bio Oils , Ethanol Etc..
FULLY AUTOMATIC ASTM D2892 UNITS TYPE E AND F
- No operator intervention for each step of the distillation up to FBP 400 C AET - Up to 150 TBP analysis per year - Easy operation in local mode and more versatile use in remote supervisor mode
Fully automatic distillation unit in accordance with ASTM 2892 method for the distillation of crude oils or cuts with automatic procedure from debutanisation to reduced pressure without any intervention from the operator during each step of the distillation except to remove the prepared fractions at the end of each sequence ( atmospheric step or reduced pressure steps) I.e. about 5 minutes every 3 to 4 hours operation.
Unit includes a D2892 column with Multiknit packing and a stainless steel boiling flask, with capacity 2 to 100 L. Special column and flask size on request.
- This unit can carry out all types of discontinuous distillation of chemical and organic components for boiling temperatures up to 200°C/392°F under atmospheric pressure and also at vacuum down to 1 mmHg which corresponds to an atmospheric equivalent temperature (AET) of 400-452°C/752-845°F. - The complete TBP D2892 distillation can be performed from the debutanisation stage to the Final boiling point within about 15 to 18 hours. All the different sequences are chained automatically. - When the next step involves a pressure change, the sample charge flask is automatically cooled to a preset temperature and return to atmospheric pressure, then operator removes full distillate receivers, replaces these with empty ones and approves the continuation of the next step toward FBP. The fractions can be prepared by temperature and / or % volume set points.
The MINIDIST PLUS type E or F process cabinet is a closed cabinet with safety doors for easy access. In Version V6.0 of MINIDIST PLUS type E or F, a built in industrial PC with interface process boards has been implemented in the local process cabinet with a color LCD display and industrial alphanumeric keyboard.
No more dedicated interfaces in the supervisor Windows NT PC generally located away from the process cabinet.
- Fully automatic for each sequence From Debutanization to FBP 375/450 C AET under vacuum. - Local mode and supervisor mode control. - Automatic fraction collectors up to 12 receivers per sequence. Maximum 72 fractions. - High level of safeties allowing to run day and night with high throughput of analysis per year (up to 150 or more TBP a year). - Distillation of any kind of petroleum or petrochemical products or fractions such as gasoline, diesel , kerosene, lubricant etc.. .But also Bio Fuels and Bio Oils Etc ..
GECDIST Net supervisor SOFTWARE
GECDIST Net supervisor software allows to monitor several distillations from GECIL Process MINIDIST PLUS product line such as MVD D2892 , type E D2892 , type A D5236 , D1160 Stand alone MINIDIST 1160 or Multiprocess units type C or D . Up to 16 distillation units can be link to one PC supervisor GECDIST Net . Our technical staff will configure the software at installation of a distillation unit.